How to Use Satin Dreams™ Paint

Achieve stunning, long-lasting results with this easy 3-step process. Whether you're flipping furniture, refreshing cabinetry, or adding color to trim, proper prep and application are key to a flawless finish.

STEP 1: Prep Your Surface

The better the prep, the better the results.

• Wipe away all grease, dust, wax, and contaminants using a degreaser or mild soap and water. Let dry completely.
  
• For surfaces with old paint, poly, or lacquer, we recommend using GreenEZ® Furniture Stripper to safely remove stubborn topcoats before painting. It’s non-toxic and designed to prep wood without harsh fumes or damage.
  
• 
  Lightly sand glossy or sealed areas using 220–320 grit sandpaper to dull the surface. This helps Satin Dreams adhere properly.
  
• If the surface feels rough or you’ve filled any imperfections, sand smooth using 320–400 grit.
  
  ✅ Important: After sanding, remove all dust with a vacuum and lint-free cloth. Even small dust particles can affect the final finish.
  

STEP 2: Apply Satin Dreams™ Paint

Our self-leveling formula makes application easy with brush, roller, or sprayer.

Brush or Roller Application:

• Do not shake. Use a stir stick to mix thoroughly before and during use.
  
• We recommend synthetic brushes or a ¼” nap microfiber or foam roller for best results.
  
• Avoid heavy application. Let each coat dry fully before recoating (2–4 hours). Two coats are recommended for full coverage.
  
• Lightly sand between coats with 320–400 grit for an ultra-smooth, professional finish.
  

HVLP Sprayer Instructions

Satin Dreams sprays beautifully for ultra-smooth results when applied correctly.

Satin Dreams sprays beautifully for ultra-smooth results when applied correctly.

• Thin the Paint (If Needed): Start with the paint unthinned. If it’s too thick for your sprayer, you may thin with 5–10% clean water until the consistency flows smoothly.
  
• Filter the Paint: Use a mesh paint strainer before filling the sprayer cup to avoid clogs.
• Recommended Tip Sizes: HVLP: 1.8–2.5mm tip Airless: 208–310 tip
• Spray in Light Passes: Hold sprayer 8–12 inches from the surface.
• Apply in overlapping passes for even coverage.
• Dry Time Between Coats: Wait 2–4 hours before recoating.
• Apply 2–3 light coats for best results.

✅ Clean your sprayer immediately after use with soap and water.

✅ Clean your sprayer immediately after use with soap and water.

✅ Clean your sprayer immediately after use with soap and water.

STEP 3: Let It Cure & Enjoy the Results

• Touch Dry in 1–2 hours
  
• Recoat time 2–4 hours
  
• Fully cured in 7 days
  

Avoid heavy use or cleaning until fully cured for maximum durability.

✨ Optional: Seal with GreenEZ® Furniture Shield

For extra protection on tabletops, cabinets, or high-use areas, apply a coat of Furniture Shield in Satin, Matte, or Gloss. It locks in your finish and adds moisture + scratch resistance.

✅ Best Surfaces for Satin Dreams™

🪑 Furniture

• Dressers, nightstands, vanities, bookshelves, chairs, and side tables
• Works beautifully on both solid wood and veneer surfaces

🚪 Cabinetry

• Kitchen cabinets, bathroom vanities, built-ins, and shelving
• Offers cabinet-grade durability without the need for a separate primer

🪵 Doors, Trim & Molding

• Interior doors, baseboards, crown molding, and window trim
• Creates a factory-like finish with minimal brush strokes

🎨 Accent & Feature Pieces

• Decorative wood panels, fireplace mantels, or upcycled finds
• Great for statement colors and high-end DIY design

🛠️ Also Works Well On:

• Previously painted or stained wood (with proper prep)
• MDF and laminate furniture (with light sanding or primer for added grip)
• Wood composites and plywood

⚠️ Not Recommended For:

• Exterior use or outdoor furniture (not weatherproof)
• Flooring or high-heat surfaces (like stove hoods or radiators)
• Unsealed bare wood without cleaning and prep
• Metal, plastic, or glass without a specialty primer