Knowledge Base

GreenEZ's Furniture Shield is a water-based urethane sealer designed to protect and enhance clear or stained wood furniture. Available in Satin, Matte, and Gloss finishes, this product provides excellent scratch and water resistance with an easy-to-apply, eco-friendly formula. This guide will provide detailed instructions on how to use Furniture Shield for optimal results. Step 1: Gather Materials Before starting, ensure you have all necessary materials: GreenEZ Furniture Shield Protective gloves Protective mask Brush, ¼” nap roller, or spray gun Clean cloths Safety First: Always work in a well-ventilated area, and wear protective gloves and a mask to avoid skin contact and inhaling fumes. Step 2: Prepare the Surface Clean and Dry: Ensure the surface is clean and completely dry before sealing. Sand if Needed: Lightly sand the surface to ensure better adhesion of the sealer. Step 3: Mix the Sealer Shake Well: Gently shake the container to mix the contents well and ensure even distribution. Step 4: Apply Furniture Shield Using a Brush or Roller: Apply Evenly: Use a brush or a ¼-inch nap roller to apply the sealer in thin, even coats. Multiple Coats: Apply two thin coats rather than one thick coat for even coverage. Allow each coat to dry completely before applying the next. Using a Spray Gun: Setup: If using a high-volume low pressure (HVLP) or low-volume low pressure (LVLP) spray gun, ensure the area is well-ventilated. Spray Evenly: Apply the sealer in even strokes, maintaining a consistent distance from the surface. Step 5: Allow to Dry Dry Time: Allow the sealer to dry completely between coats. Refer to the product instructions for specific drying times. Final Cure: Allow the final coat to cure for at least 24 hours before using the furniture. Use Cases Clear or Stained Wood Furniture: Perfect for protecting and enhancing the finish on clear or stained wood surfaces. Tables and Chairs: Ideal for high-use furniture like tables and chairs, providing durable protection. Cabinets and Shelves: Great for sealing and protecting wooden cabinets, shelves, and other fixtures. Common Problem and Solution Problem: Streaks or Uneven Finish Solution: Ensure each coat is applied thinly and evenly. Sand lightly between coats if necessary to smooth out any imperfections. Conclusion GreenEZ's Furniture Shield offers superior protection and enhancement for your wood furniture. Its eco-friendly, non-toxic formula makes it safe for indoor use while providing excellent scratch and water resistance. Ready to protect your furniture? Visit our Furniture Shield page to learn more and purchase today!

Enhance the beauty of your wood surfaces with GreenEZ's Evolve™ Soy Stains. These eco-friendly, non-hazardous, soy-based stains are designed to deliver vibrant, durable color while being safe for you and the environment. This guide will walk you through the steps to achieve professional results with Evolve™ Soy Stains.     Step 1: Surface Preparation To ensure the best possible result, start by sanding the wood surface to a 220 grit level. This preparation step is crucial for achieving the ideal surface porosity, allowing for optimal penetration of the stain. Materials Needed: Sandpaper (220 grit) Clean cloth Instructions: Sand the wood surface thoroughly to create a smooth finish. Wipe away any dust with a clean, damp cloth. Step 2: Shake the Stain Bottle Before using Evolve™ Soy Stains, vigorously shake the bottle to ensure the product & pigments are well mixed. This guarantees an even color application. Step 3: Dampen the Surface Lightly moisten the wood surface with a damp, clean cloth. This helps open the wood's pores, enhancing the stain's absorption. Step 4: Apply the Stain Materials Needed: Evolve™ Soy Stains Lamb's wool or microfiber hand applicator (or a high-quality brush) Instructions: Pour a small amount of the stain onto the applicator. Apply the stain in the direction of the wood grain for a traditional look or in circular motions for deeper penetration. Ensure even distribution of the stain. Step 5: Wipe Off Excess and Dry Instructions: Use a lint-free cloth to gently wipe the surface, removing any excess stain. Allow the stained surface to dry for 4-6 hours in a well-ventilated area. For best results, let it dry overnight indoors. Step 6: Final Checks Before Sealing Once the stain is thoroughly dry, inspect the surface for any dust or imperfections. Wipe off any surface dust with a clean cloth, preparing it for the final seal. Step 7: Apply Top Coat Seal your beautifully stained wood with GreenEZ's Furniture Shield or an equivalent top coat to protect and enhance the wood's natural beauty. Use Cases Furniture Refinishing: Restore and enhance the natural beauty of old or worn wooden furniture with vibrant, durable color. Cabinetry: Add a fresh, eco-friendly finish to kitchen or bathroom cabinets, ensuring a professional look with minimal effort. Decks and Outdoor Furniture: Protect and beautify outdoor wood surfaces with UV-stable, long-lasting color that highlights the wood grain. Wood Flooring: Achieve a rich, even finish on hardwood floors, adding warmth and character to any room. DIY Projects: Perfect for custom woodworking projects, crafts, and other DIY endeavors, providing a professional touch to your creations. Common Problem and Solution Problem: Uneven Color Application Solution: Ensure the stain is well-mixed before application and apply in even strokes. If the color is still uneven, apply a second coat following the same steps. Conclusion GreenEZ's Evolve™ Soy Stains provide an eco-friendly, professional solution for all your wood staining projects. With a non-toxic, biodegradable formula, these stains ensure safe and effective results, whether you're a DIY enthusiast or a professional. Ready to transform your wood surfaces? Visit our Evolve™ Soy Stains page to learn more and purchase today!

Introduction GreenEZ's Finishing Cleaner is designed to effectively remove stripping residue, light coats of varnish, and wood stains from various surfaces. This eco-friendly, non-toxic cleaner ensures safe and efficient cleaning for your wood and other surfaces. This guide will provide detailed instructions on how to use GreenEZ's Finishing Cleaner for optimal results. Before starting, make sure you have all necessary materials: GreenEZ Finishing Cleaner Protective gloves Protective mask Clean cloths Steel wool (0000 grade) Safety First: Always work in a well-ventilated area, and wear protective gloves and a mask to avoid skin contact and inhaling fumes. Dilution (if needed): For light residue, dilute the Finishing Cleaner according to the instructions. Apply Generously: Spray the cleaner generously onto the desired surface. Let It Sit: Allow the cleaner to sit for 1-3 minutes for stripper residue removal. For Varnish or Stain Removal: Use the cleaner at full concentration and let it sit for 5-15 minutes. Scrub Away: Use steel wool (0000 grade) to scrub away the residue. For lighter cleaning, a cloth can be used. Rinse Thoroughly: Rinse the treated area with water to remove any remaining cleaner. Dry Completely: Allow the surface to dry completely before applying any new finish. Use Cases Removing Stripper Residue: Ideal for cleaning up after using GreenEZ's Furniture Stripper. Varnish Removal: Effective in removing light coats of varnish from wood surfaces. Stain Removal: Great for removing wood stains, preparing the surface for a new finish.   GreenEZ's Finishing Cleaner is a versatile, eco-friendly solution for all your cleaning needs. Whether you're removing stripper residue, light varnish coats, or wood stains, this product ensures a safe and effective cleaning process. Ready to clean up with ease? Visit our Finishing Cleaner page to learn more and purchase today!

Stripping old paint, varnish, or other coatings from furniture can be a daunting task. GreenEZ's Furniture Stripper offers an eco-friendly, non-toxic solution that simplifies this process. This guide will walk you through the steps to effectively use this powerful product and achieve excellent results.