Brush it on
Coat it on thick, like frosting a cake. No sanding, no scrubbing. Then walk away.
FurnitureStripper Kit.
Soy-based gel lifts layers of old paint and varnish, without damaging wood. The included Finishing Cleaner wipes away any residue, leaving a prepped surface ready to refinish, with no harsh fumes.
$70.00
$75.00 SAVE $5
- Lifts multiple layers of paint and varnish in one pass
- No harsh fumes, so you can work comfortably
- Gentle on wood, even antiques and veneer
100% SECURE CHECKOUT
INSIDE THE BOX
The Stripper
Soy based gel that clings to carvings and lifts multiple layers in one pass.
The Finishing Cleaner
Neutralizes the surface so your new stain takes evenly.
The Deluxe Extras
A 3M mask, two pairs of gloves, and goggles, plus the scraper and three brushes for the job. Suit up without the hardware store run.
No Toxic Fumes, Just Pure Results.
Effortlessly removes multiple layers of old finishes without damaging wood, even in intricate details.
Formulated exclusively, our blend is committed to providing the safest and most effortless choice as an alternative to standard toxic compounds. Paired with our Finishing Cleaner for complete solution to cleaning up any and all residue.
Benefits:
- No harsh smell or toxic fumes
- Non-damaging to wood
- Biodegradable, low VOC formula
- Easy to use
- Non-carcinogenic
- Free from toxic compounds
- Soy-based, efficient gel for vertical application
- Includes cleaner and residue remover
Experience a safer, greener way to refresh and restore with GreenEZ.
Coverage Rate: Approx. 100-150 sq. ft. per Half Gallon
- Prep. Test a hidden spot, remove the hardware, and work in a ventilated space between 40°F and 90°F. Wear nitrile gloves and safety glasses.
- Apply. Brush on a thick, even coat, about 1/8 inch. The gel holds on legs, doors and trim.
- Wait. 50 to 60 minutes for one or two coats of paint or varnish, 3 to 4 hours for built-up layers, and 5 to 8 hours or overnight for polyurethane and epoxy. Cover with plastic on long waits.
- Scrape. Once the finish bubbles and softens, lift it off with a flat scraper. Reapply on stubborn spots, no cleanup needed between coats.
- Clean. Wipe the surface with Finishing Cleaner on a damp cloth, follow with a clean water rag, and let it dry fully before you refinish.
COVERAGE100 TO 150 SQ FT PER 1/2 GAL
DWELL, LATEX + OIL + CHALK50 TO 60 MIN
DWELL, POLY + LACQUER + EPOXY5 TO 8 HRS
READY SIGNALFINISH BUBBLES
CLEANUPFINISHING CLEANER + WATER
SIZES1/2 GAL KIT · DELUXE KIT
DELUXE KIT ADDS3M MASK · 2 PAIRS OF GLOVES · GOGGLES · SCRAPER · 3 BRUSHES
- 4.6★ · 177 Reviews
- Lifts Layers in One Pass
- No Harsh Fumes
- 30-Day Guarantee
- Made in the USA
SEE IT WORK
Watch it let go.
Real customers stripping and cleaning real furniture with the kit.
THE SATURDAY RITUAL
Four steps. One afternoon.
Let it work
Latex and chalk paint bubble up within the hour. Polyurethane and epoxy take 5 to 8. The gel stays wet the whole time, so overnight is fine too.
Scrape it clean
Decades of paint slide off in ribbons. Stubborn spot? Brush on a little more and scrape again, no cleanup in between.
Wipe it clean
Wipe down with the Finishing Cleaner to lift the last of the residue. Bare, clean wood, ready for stain or paint.
COATINGS AND SURFACES
What it strips. Where it works.
Where it works best
- Latex, oil-based, acrylic and spray paint
- Chalk and milk paint
- Varnish and shellac
- Lacquer and polyurethane
- Epoxy resin and epoxy paint, with a 5 to 8 hour dwell
- Multiple layers in one pass
Surfaces it works on
- Solid wood furniture and antiques
- Veneer, scraped gently with a plastic edge
- Metal furniture and hardware
- Doors, legs, trim and carved details
- Small painted floor areas
WHY IT WORKS
Three reasons. One kit.
01ONE PASS
Layers gone in one coat
Brush it on thick, give it time, and paint, varnish and stain lift together. Stubborn spots take a second coat with no cleanup in between.
“It stripped off 3 layers of old paint.”
02NO HARSH FUMES
Work where the project is
Our soy-based gel lets you strip in the garage or the basement with the windows open, without clearing everyone out of the house.
“The stripper had a really nice smell... The product also worked really quickly which was a bonus.”
CUSTOMER PHOTO03GENTLE ON WOOD
Safe for the pieces you can't replace
The gel softens the finish, not the wood. Antiques, veneer and carved details come out clean and ready for stain.
“This is my grandmother's bedroom furniture - real mahogany and approximately 150 years old.”
WHY GREENEZ
Performance
Without the Poison
Built by a dad who got sick of what the job put in the air.
- Non-Toxic FormulasAll GreenEZ products are formulated to be as non-toxic as possible while maintaining their incredible effectiveness.
- Researched & TestedEvery product created by GreenEZ passes a series of tests and experiments to ensure the highest quality experience for our customers.
- Ethically Sourced MaterialsGreenEZ uses locally & ethically sourced ingredients to make all of our products. From Soy to Citrus we do our best to get it from a sustainable source.
- Made in the USAAll GreenEZ products are researched, developed, and formulated by GreenEZ here in the United States.
GOT QUESTIONS?
Stripper kit
questions.
Everything to know before you brush on the first coat.
What finishes will it remove?
Latex, oil-based and chalk paint, plus varnish, shellac, lacquer, polyurethane and epoxy. Paint and varnish usually let go within the hour. Poly and epoxy need a longer wait, so give those 5 to 8 hours.
Heads up: factory-sealed finishes, like the original coating on most new furniture and kitchen cabinets, are cured too tightly for our gel to soak in. Not sure what you have? Brush a thick coat on a hidden spot, cover it with plastic and wait 5 to 8 hours. If it wrinkles or scrapes off soft, you're good to go. No change means it's a factory finish, and sanding is the better route.
Can I use it indoors?
Yes. There are no harsh fumes, so most of our customers work in the garage, the basement or a spare room. Keep a window open or a fan running, and wear nitrile gloves and safety glasses. If your piece was painted before 1978, test for lead first and wear a mask.
Is it safe on antiques and veneer?
Yes. The gel softens the finish, not the wood, so antiques, veneer and carved details come out clean. Test a hidden spot first, and scrape with the grain using a plastic or dull scraper on thin veneer.
How long do I leave it on?
50 to 60 minutes for one or two coats of paint or varnish, 3 to 4 hours for built-up layers, and 5 to 8 hours or overnight for polyurethane and epoxy. Cover it with plastic on long waits so it stays wet. Leaving it on for up to 24 hours won't hurt the piece.
Do I need to clean between coats?
No. Scrape off what has lifted, brush on a little more where it's stubborn, and wait again. The residue won't hurt anything.
Why is the Finishing Cleaner included?
It lifts the last of the stripper residue so your new stain or paint grips the wood. Wipe it on with a damp cloth, follow with a clean water rag, and let the piece dry fully before you refinish. It also cleans your brushes.
Do I need to sand after stripping?
Not always. After the Finishing Cleaner, many customers stain or paint right away. For the best paint adhesion, a light pass with 220 grit sandpaper helps.
Does it work on metal?
Yes. It lifts paint from metal hardware and frames too. Test a small spot first on anything with a plated or specialty finish.
What if it isn't working?
It almost always needs more time or a thicker coat. Brush on about 1/8 inch, cover it with plastic so it doesn't dry out, and give tough finishes 5 to 8 hours. Still stuck? Chat with us and we'll help you get it done. Every kit is backed by our 30-day guarantee.
Should I get the Deluxe Kit?
If you don't already own safety gear, yes. The Deluxe adds a 3M mask, two pairs of gloves, goggles, a scraper and three brushes, so you can start the moment the box arrives.
STILL STUCK? WE ANSWER FAST.
PHOTO REVIEWS
Reviewed by 177 verified buyers.
4.6
177 VERIFIED REVIEWS