Knowledge Base

Preparation

• Ensure the area is well-ventilated and free of any items that could be affected by over-spray.
• Protect surrounding areas and items with a cloth or plastic sheet.

Step 1: Shake Well

• Shake the Grease-Be-Gone bottle vigorously to mix the organic formula thoroughly.

Step 2: Apply Grease-Be-Gone

• Spray Grease-Be-Gone directly onto the greasy or oily surface, covering all affected areas evenly.

Dwell Time

• Let the solution sit on the surface for 3-5 minutes to dissolve and lift the grease effectively.

Step 3: Wipe Off

• Use a clean cloth or sponge to wipe away the grease and residue. For tougher spots, a second application may be necessary.

Step 4: Clean Up

• Rinse any tools or cloths used in warm water. Dispose of any waste materials responsibly.

Final Step: Inspect and Dry

• Inspect the cleaned area for any remaining grease spots. Allow the surface to air dry completely.

Tips:

• Regular use of Grease-Be-Gone can help maintain the cleanliness of kitchen appliances and surfaces.
• Always test the product on a small, inconspicuous area first to ensure it does not damage the surface or finish.

Preparation

• Ensure the concrete surface is clean and free from oil, grease, or wax.
• Protect surrounding areas and plants with a plastic sheet or newspaper.

Step 1: Shake Well

• Vigorously shake the Citrus Clean container to ensure the formula is well mixed, activating its grease-cutting properties.

Step 2: Wet and Apply

• Dampen the area with water to prepare the surface for effective cleaning.
• Apply a generous amount of Citrus Clean directly to the stained or dirty areas.

Dwell Time

• Allow the solution to sit on the surface for about 10 minutes to break down the grease and oils thoroughly.

Step 3: Scrub if Needed

• For stubborn stains, use a brush to scrub the area gently to help lift the stains.

Step 4: Rinse Thoroughly

• After the dwell time, rinse the area thoroughly with a hose or pressure washer to wash away the cleaner and any lifted debris.

Final Step: Dry and Inspect

• Allow the surface to air dry completely.
• Inspect the area to ensure all stains are removed and repeat the application if necessary.

Tips:

• Regular use helps maintain the cleanliness and appearance of your surfaces.
• Always test the product on a small inconspicuous area first to ensure compatibility.

Preparation

• Ensure the area is well-ventilated and free from unnecessary items that might obstruct the cleaning process.
• Protect any surfaces or objects nearby that might be sensitive to the cleaner.

Step 1: Shake Well

• Vigorously shake the Eco-Clean container to ensure the concentrated formula is well mixed.

Step 2: Apply GreenEZ Eco-Clean

• Depending on the level of dirt or grease, decide whether to dilute Eco-Clean with water.
• Apply the cleaner generously to the dirty surface using a cloth, sponge, or brush.

Dwell Time

• Allow the cleaner to sit for a few minutes to effectively break down grease and dirt.

Step 3: Scrub and Wipe

• For stubborn stains, use a scrubbing brush to help lift the dirt.
• Wipe the surface clean with a damp cloth to remove any residue.

Step 4: Rinse and Dry

• If necessary, rinse the surface with clean water to remove any leftover cleaner.
• Dry the area thoroughly with a clean, dry cloth.

Final Step: Inspection and Touch-Up

• Inspect the cleaned area for any missed spots or residue.
• Reapply Eco-Clean to any areas that need additional cleaning.

Tips:

• Use Eco-Clean on a variety of surfaces including kitchen counters, bathroom tiles, and outdoor furniture for versatile cleaning.
• For extensive cleaning tasks, consider using Eco-Clean in a concentrated form for maximum effectiveness.

Preparation

• Ensure the area where Vista Pure will be used is clean and free from excessive dirt and debris.
• Protect any surrounding areas or sensitive materials with a drop cloth or newspaper to prevent unwanted spray.

Step 1: Shake Well

• Before use, shake the bottle of Vista Pure thoroughly to ensure the cleaning formula is well mixed.

Step 2: Apply GreenEZ Vista Pure

• Hold the spray bottle about 6-8 inches away from the glass or appliance surface.
• Using a steady motion, spray a light coating of Vista Pure across the entire area to be cleaned.

Dwell Time

• Allow the solution to sit on the surface for a minute to effectively loosen dirt and residues.

Step 3: Wipe and Clean

• Use a clean, soft microfiber cloth or squeegee to wipe the surface. Start from the top and move downward in a consistent, overlapping pattern to prevent streaks.

Step 4: Dry

• Ensure all areas are thoroughly dried with a fresh, dry cloth to avoid any water spots or leftover streaks.

Step 5: Clean Up

• Store the bottle of Vista Pure safely away from direct sunlight and ensure it’s tightly closed.
• Dispose of any used cloths or paper in accordance with local regulations.

Final Step: Inspect

• Reinspect the surface to ensure it is clear and streak-free. Touch up any missed spots with a small amount of Vista Pure if necessary.

Removing Stains with Vista Pure

• For tougher stains like fingerprints or watermarks, apply Vista Pure directly to the stain, let it dwell for an additional minute, then wipe and dry as described above.

Tips:

• Regular cleaning with Vista Pure can help prevent buildup of grime and maintain the clarity and cleanliness of your surfaces.