How To Use GreenEZ Strip & Clean Kit

Preparation
- Ensure the area is well-ventilated.
- Protect surrounding areas with a drop cloth or newspaper.

Step 1: Shake Well
Before use, shake the GreenEZ Furniture Stripper bottle thoroughly to ensure the formula is well mixed.

Step 2: Apply GreenEZ Furniture Stripper
Using a brush or roller, apply a generous layer of GreenEZ Furniture Stripper to the surface you are treating. For intricate areas, a smaller brush may be required for accurate application.

Dwell Time: The dwell time varies depending on the type of coating and the material:

- Paint and Varnish on Wood: Minimum 50-60 minutes. Wait until the finish visibly bubbles or softens.

- Epoxy and Polyurethane Finishes: Minimum 5-8 Hours. Look for a visible softening or lifting of the finish.

Step 3: Cover (If Needed)
In cases of thick or stubborn coatings, or when working in direct sunlight or windy conditions, cover the treated area with plastic to prevent the stripper from drying out too quickly.

Step 4: Scrape Off Coating
Once the coating has visibly reacted, use a scraper, putty knife, or stripping tool to gently remove the lifted finish from the surface. For intricate or delicate areas, a soft brush or a stripping pad may be more appropriate.

Step 5: Clean Up
After stripping, use GreenEZ Finishing Cleaner and a clean cloth or sponge to remove any remaining residue. For porous surfaces, a second application of the cleaner may be necessary to ensure all residue is removed.

Final Step: Prep for Stain, Paint, or Sealer
After cleaning up the residue with Finishing Cleaner sand the surface down to bare wood working up to a 220 grit to ensure the surface is porous enough for stains or sealer.

Removing Stain with Finishing Cleaner: To remove stain apply the Finishing Cleaner over the stained section. Let dwell for 15-30 minutes and scrub with fine steel wool.

Tips:
- Always test the product on a small, inconspicuous area first.
- Wear protective gloves and eyewear during application.
- Follow specific disposal instructions for waste and leftover product.

By following these tailored instructions, you can effectively use GreenEZ Strip & Clean Kit on a wide range of materials and coatings, ensuring optimal results for every project.

Adjust dwell times as necessary based on your observations of the coating's reaction to the stripper, as some may require slightly longer or shorter times than suggested.

For complete Application directions and Cautions on the use of Green EZ Furniture Stripping Kit, please refer to the data sheets below before using the product:

Furniture Stripper:

Tech Data

Safety Data

Finishing Cleaner

Tech Data 

Safety Data

• Latex Paint
• Oil-Based Paint
• Acrylic Paint
• Chalk Paint
• Milk Paint
• Spray Paint
• Polyurethane Varnish
• Shellac
• Lacquer
• Epoxy Resin
• Epoxy Paint
• Tabletop Epoxy